Edimax Technology 3G-6200n - Manual (Page 67)

66
Parameters Description
Enable wireless
access control
Enable wireless access control
Add MAC
address into the
list
Fill in the "MAC Address" and "Comment" of the
wireless station to be added and then click "Add".
Then this wireless station will be added into the
"Current Access Control List" below. If you find any
issues before adding it and want to correct it. Just click
"Clear" and both "MAC Address" and "Comment" fields
will be cleared.
Remove MAC
address from
list
If you want to remove some MAC address from the
"Current Access Control List ", select the MAC
addresses you want to remove in the list and then click
"Delete Selected". If you want remove all MAC
addresses from the table, click "Delete All" button.
Click "Reset" will clear your current selections.
Click <Apply> at the bottom of the screen to save the configurations.
You can now configure other advance sections or start using the router.