Edimax Technology 3G-6200n - Manual (Page 59)

58
2.5.2 Advanced Settings
You can set advanced wireless LAN parameters of this router. The
parameters include Authentication Type, Fragment Threshold, RTS
Threshold, Beacon Interval, preamble Type, etc. You should not change
these parameters unless you know their function and effects.
Parameters Description
Fragment
Threshold
"Fragment Threshold" specifies the maximum
fragmentation size of data packet to be transmitted. If
this value is too low, it will result in bad performance.
RTS
Threshold
When the packet size is smaller the RTS threshold,
the wireless access point will not use the RTS/CTS
mechanism to send this packet.
Beacon
Interval
The interval of time that this wireless access point
broadcast a beacon. Beacon is used to synchronize
the wireless network.
DTIM Period
The DTIM period you specify here indicates how
often the clients served by this access point should
check for buffered data which still exists on the AP