Edimax Technology 3G-6200n User Manual

Page 30

Step 3) Broadband Type ( Connect to Internet via Ethernet )

3G-6200n provides two types of Internet connection method: wireless
(3G/3.5G) or wired connection. You can access internet via USB 3G/3.5G
modem card, or via wired xDSL / cable modem connection. However, only
one connection method (wireless or wired) can be used at the same time.

In this section you have to select one of six types of connections that
you will be using to connect your broadband router’s WAN port to your
ISP (see screen below).

Note: Different ISP’s require different methods of connecting to the
Internet, please check with your ISP as to the type of connection it
requires.

Description

Cable Modem Your ISP will assign you with an IP address

automatically

Fixed-IP xDSL Your ISP gave you an IP address already

PPPoE xDSL

Your ISP requires you to use Point-to-Point Protocol
over Ethernet (PPPoE)

PPTP

xDSL Your ISP requires you to use a Point-to-Point

Tunneling Protocol (PPTP)

L2TP xDSL

Your ISP requires you to use a Layer Two Tunneling
Protocol (L2TP)

Telstra Big Pond This Protocol only used for Telstra Big Pond Internet

service in Australia