Edimax Technology BR-6478AC - Manual (Page 36)

36
addresses to access the internet, input the MAC address of
your computer here. If your computer is connected to
internet via cable modem, click “Clone Mac address” to
enter the MAC address automatically.
Use the following IP address:
Static IP Address Input the static IP address assigned by your ISP.
Subnet Mask Input the subnet mask assigned by your ISP.
Default Gateway
Address
Input the default gateway address assigned by your
ISP.
MAC Address If your ISP only permits computers with certain
MAC addresses to access the internet, input the
MAC address of your computer here. If your
computer is connected to internet via cable modem,
click “Clone Mac address” to enter the MAC address
automatically.
DNS address Select “Obtain an IP address automatically” or “Use
the following IP address”. If you choose “Use the
following IP address”, you will need to complete the
“DNS1 Address”, “DNS2 Address” and “DNS3
Address” fields below.
DNS1 Input the address of DNS1 assigned by your ISP.
DNS2 Input the address of DNS2 assigned by your ISP.
DNS3 Input the address of DNS3 assigned by your ISP.
Enable Dual Wan Access:
If your ISP provides a dual-WAN service, then check the box “Enable Dual Wan
Access” and enter the required information.
PPTP Setting:
User ID
Input the user ID assigned by your ISP.
Password Input the password assigned by your ISP.
PPTP Gateway Input the PPTP gateway assigned by your ISP.
Connection ID Input the connection ID assigned by your ISP. (usually
not use)
MTU Input the MTU (maximum transmission unit) value of
your network connection. The default value is 1392.
Connection Type Select connection type from: