Edimax Technology BR-6478AC - Manual (Page 31)

31
IV-3-1-1. Dynamic IP
Host Name Input the host name of your computer (only required if
your ISP instructs you to do so).
MAC Address If your ISP only permits computers with certain MAC
addresses to access the internet, input the MAC
address of your computer here. If your computer is
connected to internet via cable modem, click “Clone
Mac address” to enter the MAC address automatically.
DNS address Select “Obtain an IP address automatically” or “Use the
following IP address”. If you choose “Use the following
IP address”, you will need to complete the “DNS1
Address”, “DNS2 Address” and “DNS3 Address” fields
below.
DNS1 Input the address of DNS1 assigned by your ISP.
DNS2 Input the address of DNS2 assigned by your ISP.
DNS3 Input the address of DNS3 assigned by your ISP.
MTU Input the MTU (maximum transmission unit) value of
your network connection. The default value, which is
typical for a dynamic IP or static IP, is 1500.
TTL Enable the “TTL” function if your ISP requires you to do
so.