Gembird NSW-R4 - Manual (Page 20)

20
GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
NSW-R4 WIRELESS BROADBAND ROUTER, 300M
Wireless Interface: If you do not want to use the wireless interface,
uncheck the box to disable all the wireless functions.
Band: Supported 802.11B, 802.11G, 802.11N and mixed.
Mode: Supported AP, Client, WDS and AP+WDS mode.
Network TYPE: This type is only valid in client mode.
SSID: Service Set Identifier, external name of your wireless network.
Channel width: Select 40MHz if you use 802.11n or 802.11n mixed mode,
otherwise 20MHz, it is default value.
Control Sideband: it is only valid when you choose channel width 40MHz.
Channel Number: Indicates the channel setting for the router. By default
the channel is set to 6.
Step 6 – WLAN Security Settings
Secure your wireless network by turning on the WPA or WEP security
feature of the router. You can set WEP and WPA-PSK security mode.
The following picture shows how to set the WEP security.