Gembird NSW-R4 User Manual

Page 14

GEMBIRD EUROPE B.V.

http://www.gembird.eu

All brands and logos are registered trademarks of their respective owners

NSW-R4 WIRELESS BROADBAND ROUTER, 300M

Select DHCP Client to obtain IP Address automatically from your ISP.

This mode is commonly used for Cable modem services.

Mode 2: Static IP

Select Static IP Address if the IP information is provided to you by your

ISP. You will need to enter the IP address, subnet mask, gateway address,

and DNS address (-es) provided to you by your ISP. Each IP address

entered in the fields must be in the appropriate IP form, which are four octets

separated by a dot (x.x.x.x). The router will not accept the IP address if it is

not in this format.

IP Address: Enter the IP address assigned by your ISP