Melitta Caffeo CI - Manual (Page 38)

36
9.7 Integrated descaling programme
The integrated descaling programme removes lime residues from the interior of the
appliance. It takes a total of approximately 25 minutes. You can check the progress
of the programme at any time on the progress bar on the graphic display.
Caution!
– Run the integrated descaling programme every 3 months; at the latest,
however, when a prompt appears on the graphic display.
– Only use the Melitta ® ANTI CALC Espresso Machines descaling agent.
These descaling agents are specifically designed for the Melitta ®
CAFFEO ® CI ® .
– Never use vinegar or other descaling agents.
Run the integrated descaling programme as follows:
1 Select the Care sub-menu.
2 Turn the rotary switch until Descaling is
highlighted and press it to confirm the selection.
3 Turn the rotary switch until Start is highlighted
and press it to start the programme.
→ The prompt Empty container and tray will appear
on the graphic display.
4 Empty the drip tray and the coffee grounds
container and then reinsert them.
→ The prompt Remove water tank will appear on the
graphic display.
5 Lift the lid of the water tank (Fig. A, No. 6) and
pull the water tank up and out of the appliance
and then empty it completely.
6 If you are using a water filter, remove it from
the water tank.
7 Add the descaling agent (e.g. Melitta ® ANTI
CALC Espresso Machines liquid descaling agent)
to the water tank according to the instructions on
the packaging.
Care
Descaling
Cleaning
Filter
Descaling
Start
Exit
Empty
container
and tray
Descaling
Remove
water tank
Descaling