Melitta Caffeo CI User Manual

Page 16

6.2 Preparing a cappuccino

Prerequisite: The appliance must be ready for operation (see „Switching on

and off“ on page 12).

• Place a suitable vessel under the outlet.
• Push the outlet downwards as far as it will go.
• Connect the

short tube with the outlet and the supplied Melitta

CAFFEO

milk container (Fig.

C) or use the long tube for

conventional milk cartons.

• Press the button for coffee strength

to adjust the coffee strength.

• Press the button for cappuccino

→ The grinding process and coffee dispensing start

now. Dispensing ends automatically when the set
dispensed quantity is reached.

→ The bean symbols indicate the coffee strength. The

dispensed quantity is displayed in millilitres.

• Turn the rotary switch to adjust the dispensed

quantity while the coffee is being dispensed.

→ To stop dispensing coffee before the programmed amount is reached, press

the rotary switch. The appliance will then continue with dispensing the milk.
The appliance warms up for milk dispensing.

→ Milk dispensing will start. Dispensing ends automatically when the set milk

quantity is reached.

• To completely cancel coffee and milk dispensing, press the button for

cappuccino

• Turn the rotary switch to adjust the milk quantity while the milk is being

dispensed, if required.

• To stop dispensing milk before the programmed amount is reached,

press the rotary switch.

• Carry out the Easy Cleaning programme, if necessary. The appliance

will prompt you to do this automatically (see page 31)

OR select

another beverage.

Cappuccino

110 ml 060 ml