Melitta Caffeo CI - Manual (Page 35)

33
ENGLISH
• Fill the milk container with 50 ml of milk system cleaning agent and then
fill it up to the 0.5 l mark with warm tap water.
• Connect the tube to the milk container and to the outlet and press the
rotary switch to confirm.
→ The “Intensive Cleaning” programme will start. This will release steam from
the machine and hot cleaning liquid will flow out of the outlet.
→ Subsequently, the programme interrupts automatically and prompts you to
rinse the milk container.
• Rinse the milk container thoroughly and then fill it with 0.5 l of fresh tap
water.
• Press the rotary switch to confirm.
• Connect the tube to the milk container and to the outlet.
• Press the rotary switch to confirm.
• Empty the vessel under the outlet and reinsert it under the outlet.
• Press the rotary switch to continue the programme.
→ Hot water will flow out of the outlet when rinsing. The appliance is then
ready for operation.
Note
We recommend running the “Intensive Cleaning” programme once a week to
ensure optimum protection of your appliance and the best hygiene standards.
Cleaning parts of the milk system
In addition to the intensive cleaning programme, we recommend regular cleaning of
the milk container, milk distributor and the cover of the front milk distributor.
• Disconnect the tube from the outlet.
• Flip open the outlet forwards.
• Pull the milk unit downwards in the direction of the arrow and out of the
outlet (Fig. G).
• Remove the front cover from the milk distributor (Fig. H).
• Rinse the individual parts with hot water.