Muratec F-116 - Manual (Page 67)

Alignment and Troubleshooting
4-7
In exit area
1. Open and close the front door. The jammed
paper is automatically ejected from the machine.
If you do not see the jammed paper, go to next
step.
2. Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there is
any resistance when you pull, stop and go to the
next step.
3. Open the rear door.
4. Pull the pressure levers down and remove the
paper.
5. Return the pressure levers to their original
position.
6. Close the rear door.
7. Open and close front door, printing automatically
resumes.