beautypg.com

Muratec F-116 User Manual

Page 118

background image

Alignment and Troubleshooting

4-58

9) Vertical Line Getting Curved

Description : When printing, vertical line gets curved.

1. If the supply of +24v is

unstable in the Main Control board

linking with LSU, check drive by

EDC Mode:

LSU Check.

Replace LSU.

1. Replace theToner Joint PBA.
2. Replace the MainPBA.

2. Chect the Deve PBA

in the Toner Cartridge.

This manual is related to the following products: