3Com WL-603 - Manual (Page 108)

106 C HAPTER 5: C ONFIGURING THE R OUTER
Static Routes You can configure static routes in this screen. You can setup a static route
that will get all traffic with destination to business network to go through
VPN tunnel and the rest outside of the VPN tunnel.
Figure 82 Static Routes Screen
To add a static route entry to the table, click Add (see Figure 83 ).
To change an existing entry, click Edit. To delete an entry, click Delete.
Figure 83 Add Static Route Screen
Enter the following information:
■ Network Address — the network address of the static route.
■ Subnet Mask — the subnet mask of the route.
A network address of 0.0.0.0 and a subnet mask of 0.0.0.0 indicates the
default route.