Smart Technologies FSSBID 100 User Manual
Page 52
4 2
|
M O D E L F S S B I D 1 0 0 H : C O N N E C T I N G D E V I C E S I N S I D E Y O U R S M A R T M O B I L E
S T A N D ’ S C A B I N E T
99-00962-20 REV C0
To connect your
flat-panel display
1.
Connect speaker cables A02 and A03 to your flat-panel display’s
speaker receptacles.
2.
Connect the VGA video plug from cable V04 to your flat-panel display’s
VGA video receptacle.
3.
Connect the 3.5 mm stereo audio plug from cable A04 to an audio receptacle
on your flat-panel display’s connection panel.
4.
Connect the SMART Mobile Stand’s prewired power cable to your flat-panel
display’s power receptacle.
5.
Connect the other end of this cable to an available receptacle on your
SMART Mobile Stand’s power bar.
IMPORTANT
•
Your flat-panel display won’t look exactly like the one shown on page 41.
•
Some flat-panel displays require audio/video adapters, which you can
purchase from your
•
Don’t connect your SMART Mobile Stand to a power outlet before you install
the rear access panels (page 58).