3Com 3CRWDR200A-75 - Manual (Page 81)

Advanced 81
Advanced Selecting Advanced from the main menu displays the following seven
tabs in your Web browser window: Static Route, RIP, DDNS, Quality of
Service, ProxyARP, Port Mapping, and IPSec.
Static Route The Router supports static route functionality. Select the Static Route tab
to display the screen.
Figure 53 Static Route screen
Please enter the following values in the box respectively to specify a static
route:
■ Network Address — the network address of the route. If network
address and subnet mask are both set to 0.0.0.0, this is the default
route.
■
Subnet Mask — the subnet mask of the route. If network address and
subnet mask are both set to 0.0.0.0, this is the default route.
■
Gateway — the gateway used to route data to the network specified
by the network address.
■
The network interface associated with the IP address.
RIP The Router supports the Routing Information Protocol (RIP). RIP allows
you to set up routing information on one RIP enabled device, and have