3Com 3CRWDR200A-75 - Manual (Page 42)

42 C HAPTER 4: R UNNING THE S ETUP W IZARD
Figure 23 DHCP Server Setup Screen
To activate the DHCP Server option, select Enable the DHCP server with
the following settings: and specify the IP pool range. The largest available
continuous IP pool will be automatically entered; if this is not appropriate,
make your required changes. To disable DHCP, select Do not enable the
DHCP server. Click Next when you have finished.
Wireless Settings Figure 24 Wireless Configuration Screen
This screen displays the Channel and Service Area Name. It also allows
you to change these settings. There are a maximum of 14 channels, the
number available to you is dependent on the country you reside in.
Selecting Clear Channel Select from the Channel drop-down list allows