3Com 3CRWDR200A-75 - Manual (Page 40)

40 C HAPTER 4: R UNNING THE S ETUP W IZARD
IP over ATM Mode(IPoA)
Figure 20 The IP over ATM Screen
To set up the Router for use with an IPoA mode, use the following
procedure:
1 WAN IP Address: Enter the IP Address given by your ISP.
2 WAN Subnet Mask: Enter the subnet mask given by your ISP.
3 Manual Default Gateway Configuration: Select this option to enter the
WAN interface’s IP Address if you are given with this information by your
ISP or select a WAN interface to use to connect to it.
4 Manual DNS configuration: Enter the DNS server’s address from the ISP if
it is required. (this is optional).