3Com 3C389 - Manual (Page 20)

2
I
NSTALLING THE
T
OKEN
L
INK
V
ELOCITY
PC C
ARD
Kit Contents
In addition to this manual, your kit contains the following
items:
■
3Com 3C389 TokenLink Velocity PC Card
■
Token ring PC Card RJ-45 cable
■
Five TokenDisk diskettes
■
An shielded twisted pair (STP) connector for
connection to STP network wiring
The 3C389 PC Card cable can be purchased separately.
If you want additional cables, contact your 3Com
marketing representative or your place of purchase.
Installation Tips
If you plan to use Card and Socket Services software,
Version 2.0 or higher, install it and reboot your PC. The
software may be provided with your PC or operating
system. See Chapter 1 for a description of these services.
The README.TXT file on TokenDisk diskette #2 contains
more information to help you configure and customize
the 3C389 PC Card.
Installing the 3C389 PC Card
The procedures in this section explain how to physically
install the 3C389 PC Card. The installation procedure is
summarized by the following sequence:
■
Attach the RJ-45 cable to the 3C389 PC Card.
■
Insert the 3C389 PC Card into the PC.
■
Plug the cable into the appropriate network port.