Yamaha AR-80 User Manual
Page 97
91
8.
When you finish playing, press the STOP button.
The DISK IN USE lamp lights intermittently while the data is being completely recorded. When
recording is completed, the M.D.R. returns to normal stop status and the new song is
automatically named “SONG 1.”
9.
To hear your newly recorded performance, press the PLAY button.
Playback will begin after a couple of seconds. For more
information on playback and other playback-related functions, see
page 99.
10.
Input a name for your new song.
The AR-80 automatically assigns a name and number to a newly recorded song (for example,
“Song 1”). However, you can assign an original name to the song with the Input Name function
(see page 97).
STOP
PLAY
SONG SELECT
REC
MUSIC DISK RECORDER
DISK IN USE
Never attempt to press the eject
button or turn the power off
during recording, reading and
playing back. Doing so can
damage the disk and possibly
the disk drive. Be sure to
remove the floppy disk from
the disk drive before turning off
the power.
CAUTION
Be sure to remove the floppy
disk from the disk drive after
the STOP lamp lights up
(unless you intend to play back
the song or record additional
parts).
CAUTION