Zebra Technologies Zebra Z4000 - Manual (Page 61)

Standard Printer Fonts
For more information on fonts, refer to the ZPL II Programming Guide.
203 DOTS/INCH (8 DOTS/MM) PRINTHEAD
Fonts
Dot Matrix
(h x w)
(Defaults)
Type*
Minimum
Character
Size (h x w)
Max
Char
/In
A 9 x 5 U-L-D 0.044” x 0.030” 33.3
B 11 x 7 U 0.054” x 0.044” 22.7
C, D 18 x 10 U-L-D 0.089” x 0.059” 16.9
E 28 x 15 OCR-B 0.138” x 0.098” 10.2
F 26 x 13 U-L-D 0.128” x 0.079” 12.7
G 60 x 40 U-L-D 0.295” x 0.236” 4.2
H 21 x 13 OCR-A 0.103” x 0.093” 10.8
GS 24 x 24 SYMBOL 0.118” x 0.118” 8.5
Ø 15 x 12 SCALEABLE (SMOOTH) FONT
* Type: U - Upper Case, L - Lower Case, D - Descenders
300 DOTS/INCH (11.8 DOTS/MM) PRINTHEAD
Font
Dot Matrix
(h x w)
(Defaults)
Type*
Minimum
Character
Size (h x w)
Max
Char
/In
A 9 x 5 U-L-D 0.030” x 0.020” 50.8
B 11 x 7 U 0.036” x 0.030” 33.8
C, D 18 x 10 U-L-D 0.059” x 0.040” 25.4
E 42 x 20 OCR-B 0.138” x 0.085” 23.4
F 26 x 13 U-L-D 0.085” x 0.053” 19.06
G 60 x 40 U-L-D 0.197” x 0.158” 6.36
H 34 x 22 OCR-A 0.111” x 0.098” 10.02
GS 24 x 24 SYMBOL 0.079” x 0.079” 12.7
Ø Variable SCALABLE (SMOOTH) FONT
* Type: U - Upper Case, L - Lower Case, D - Descenders
n Bit-mapped fonts A, B, D, E, F, G, H, and GS are expandable up to
10 times, height- and width-independent. However, fonts E and H
(OCR-B and OCR-A) are not considered in-spec when expanded.
n The Scaleable Smooth Font (CG Triumvirate™ Bold Condensed) is
expandable on a dot-by-dot basis, height- and width-independent,
while maintaining smooth edges, to a maximum of 1500 x 1500
dots.
n IBM Code Page 850 International characters available in fonts A, B,
D, E, F, G and Ø through software control.
Z Series™ User’s Guide 53
61
H:...uspiran2.vp
Thu Jun 18 16:02:50 1998
Color profile: Disabled
Composite Default screen