Zebra Technologies Zebra Z4000 - Manual (Page 57)

NOTE: Printer specifications are subject to change without notice. Your
printer may not have all of the options described in these specifications. If
you have questions as to the ability of the Z Series™ printer to meet the
needs of your application, contact either your Zebra Distributor or Zebra
Technologies Corporation.
General Specifications
Z Series™ User’s Guide 49
Printer Specifications
SPECIFICATION Z4000 PRINTER Z6000 PRINTER
Height 11.5” (292.5 mm) 11.5“ (292.5 mm)
Width 8.25” (209.6 mm) 12.8“ (325.1mm)
Depth 16” (406.4 mm) 18.3“ (464.8 mm)
Weight (option-dependent) 24.5 lbs. (11.1 kg) 26.5 lbs. (12.0 kg)
Electrical 90 to 265VAC, 48-62 Hz
5 Amps (Fused)
Agency Approvals Built to CISPR 22B, IEC 950, 801-2,-3, and -4
standards.
Complies with FCC class “B” and Canadian Doc.
class “A” rules.
Carries the CE mark of compliance.
Temperature Operating 40° F to 105° F (5° C to 40° C)
Storage -40° F to 140° F (-40° C to 60° C)
Relative Humidity 5% to 85%, non-condensing
Communications Interfaces RS-232/CCITT V.24 and RS-485 Serial Data
Interface; 110 to 38400 Baud, Parity,
Bits/Char., and Xon-Xoff or DTR/DSR
Handshake Protocols - all selectable.
RS-485 Serial Data Interface; 110 to 38400
Baud, Parity, Bits/Char. All selectable.
Xon-Xoff Handshake Protocol required.
8-Bit Parallel Data Interface; Supports IEEE
1284 bi-directional parallel communications in
“nibble mode”
Error Detection CRC Protocol
Table 4. General Specifications
57
H:...uspiran2.vp
Thu Jun 18 16:02:49 1998
Color profile: Disabled
Composite Default screen