Yamaha MCR-E810 - Manual (Page 7)

3
En
Eng
lish
INTR
ODUCTION
■ Front panel
1 STANDBY/ON
Turns the receiver on or sets it to the standby mode (see
page 19).
2 Remote control sensor
Receives signals from the remote control.
3 DISPLAY
Switches the information shown in the front panel display
(see page 23).
4 Front panel display
Shows the various infomaiton such as the clock time or the
tuning frequency.
5 MEMORY (TIME ADJ)
• Stores a preset station in the memory. Hold down this
key for more than 2 seconds to preset radio stations
automatically (see page 38).
• Sets the clock before using the timer function (see
page 19).
6 AUTO/MAN’L (TIMER)
• Switches between Auto Tuning mode and Manual Tuning
mode when tuner is selected as an input source (see
page 37).
• Turns the clock timer function on or off (see page 43).
7 PRESET/BAND
Switches between FM, AM, and the preset mode when
tuner is selected as an input source.
8 PRESET/TUNING d / u (HOUR, MIN)
Selects a tuning frequency when tuner is selected as an
input source.
9 PURE DIRECT
Turns on or off the Pure Direct mode (see page 22).
0 TIMER LED
Lights up when the clock timer is on (see page 43).
A PHONES
Outputs audio signals for private listening with headphones.
B BASS
Adjusts the low frequency responce (see page 22).
C TREBLE
Adjusts the high frequency responce (see page 22).
D BALANCE
Adjusts the volume level of each left and right speaker
channel (see page 22).
E INPUT
Selects an input source.
F VOLUME
Adjusts the volume level.
Controls and Functions
Receiver (RX-E810)
MIN MAX
VOLUME
INPUT
BALANCE
L R
TREBLE BASS
PHONES
STANDBY/ON
TIMER DISPLAY MEMORY
NATURAL SOUND STEREO RECEIVER RX-E810
PRESET/BAND PRESET/TUNING
PURE DIRECT
HOUR TIMER TIME ADJ MIN
AUTO/MAN'L
1 2 3 4 5 6 7 8 9
A 0 B C D E F