Yamaha MCR-E810 - Manual (Page 22)

CONNECTING THE POWER CABLES
18
En
Once all connections are complete, connect the power cable of the DVD player to the AC OUTLET(S) terminal on the
rear of the receiver (or the AC wall outlet if the AC OUTLET(S) terminal is not available), and then plug the power cable
of the receiver into the AC wall outlet.
■ AC OUTLET(S) (SWITCHED)
U.K. and Australia models ..................................... 1 outlet
Korea model ...............................................................None
Other models .........................................................2 outlets
Use these outlet(s) to supply power to the DVD player or any connected components. Connect the power cable of your
other components to these outlet(s). Power to these outlet(s) is supplied when the receiver is turned on. For information
on the maximum power or the total power consumption of the components that can be connected to these outlet(s), see
“Specifications” on page 67.
Connecting the Power Cables
L
R
AV
AUDIO
OUT
DIGITAL OUT
COAXIAL
COMPONENT
S VIDEO VIDEO P B
P R Y
OPTICAL
VIDEO OUT
MAINS
TO RX-E810
L R
L R
AC OUTLETS
SWITCHED
MAINS
SPEAKERS
DOCK
DVD/CD
TAPE/MD
AUX
OUT
IN
FM
GND
AM
ANTENNA
6 MIN / SPEAKER
TO DVD-E810 SUBWOOFER
OUT
100W MAX. TOTAL
75
UNBAL.
DVD player
Receiver
(Europe model)
To the AC wall outlet
To AC OUTLET(S) on the
rear panel of the receiver
(or the AC wall outlet)