Yamaha MCR-E810 - Manual (Page 46)

42
En
Radio Data System Tuning (U.K. and Europe Models Only)
■ Additional CT (clock time) settings
You can use CT information received from the Radio Data
System stations to adjust the built-in clock of the receiver.
1
While tuning into a Radio Data System
station, press DISPLAY repeatedly so that the
clock appears in the front panel display of
the receiver.
2
Press FREQ/TEXT once.
“CT
→
Clock” appears in the front panel display.
3
Press PTY SEEK MODE repeatedly to select
“CT
→
Clock” or “Local CT”, and then press
PTY SEEK START to switch the setting
between “ON” and “OFF”.
CT
→
Clock
Set this to “ON” if you want to apply CT information
received from the Radio Data System stations to the
built-in clock of the receiver. (The default setting is
“ON”.)
Local CT
Set this to “ON” if you want to apply the daylight
saving time or summer time to CT information
received from the Radio Data System stations. (The
default setting is “ON”.)
4
Press FREQ/TEXT to confirm the settings.
STANDBY/ON POWER
TV
1 2 3 4
5 6
9 0
7 8
SCAN DIMMER
A-B
PROG
SHUFFLE TV INPUT
ON SCREEN MENU PRESET
ENTER A-E
DISPLAY
SLEEP
DVD/CD TUNER BAND
TAPE/MD
SUBTITLE ANGLE ZOOM AUDIO
AUX/TV DOCK
A-E
INFO.
SET UP
TV VOL VOLUME
TOP MENU
/RETURN
TV CH
REPEAT
FREQ/TEXT
PTY SEEK MODE START
FREQ/TEXT
PTY SEEK START
PTY SEEK MODE
DISPLAY
TUNER