ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series User Manual
Page 274
Prestige 660R-6xC Series User’s Guide
273
Appendix G
The following table shows RFC-2408 ISAKMP payload types that the log displays. Please
refer to the RFC for detailed information on each type.
1
Redirect datagrams for the Host
2
Redirect datagrams for the Type of Service and Network
3
Redirect datagrams for the Type of Service and Host
8
Echo
0
Echo message
11
Time Exceeded
0
Time to live exceeded in transit
1
Fragment reassembly time exceeded
12
Parameter Problem
0
Pointer indicates the error
13
Timestamp
0
Timestamp request message
14
Timestamp Reply
0
Timestamp reply message
15
Information Request
0
Information request message
16
Information Reply
0
Information reply message
Table 102 Syslog Logs
LOG MESSAGE
DESCRIPTION
hr:mm:ss hostname
src="
dst="
msg="
devID="
"This message is sent by the system ("RAS" displays as the
system name if you haven’t configured one) when the router
generates a syslog. The facility is defined in the web MAIN
MENU->LOGS->Log Settings page. The severity is the
log’s syslog class. The definition of messages and notes are
defined in the various log charts throughout this appendix.
The “devID” is the last three characters of the MAC address
of the router’s LAN port. The “cat” is the same as the
category in the router’s logs.
Table 103 RFC-2408 ISAKMP Payload Types
LOG DISPLAY
PAYLOAD TYPE
SA
Security Association
PROP
Proposal
TRANS
Transform
Table 101 ICMP Notes (continued)
TYPE
CODE
DESCRIPTION