ZyXEL Communications G-302 - Manual (Page 22)

ZyXEL G-302 v3 User’s Guide
22 Chapter 1 Getting Started
Figure 7 ZyXEL Utility: Site Survey
4 To join a network, either click an entry in the table and then click Connect.
5 If the wireless security is activated for the selected wireless network, the Security
Settings screen displays. This screen varies according to the network’s encryption
method. Configure the same security settings as the associated network.
Note: If the selected network is unavailable or security settings are not correct, the G-
302 v3 cannot connect to a network.
Figure 8 ZyXEL Utility: Security Settings
6 Verify that you have successfully connected to the selected network and check the
network information in the Link Info screen. If the G-302 v3 is not connected to a
network, the fields in this screen are blank.