ZyXEL Communications G-302 - Manual (Page 19)

ZyXEL G-302 v3 User’s Guide
Chapter 1 Getting Started 19
1.2 G-302 v3 Hardware and Utility Installation
Follow the instructions in the Quick Start Guide to install the ZyXEL utility and make
hardware connections.
1.3 Configuration Methods
To configure your G-302 v3, use one of the following applications:
• Wireless Zero Configuration (WZC) (recommended for Windows XP)
• ZyXEL Utility (This guide shows you how to configure the G-302 v3 using the ZyXEL
utility)
• Odyssey Client Manager (not supplied)
Refer to the Odyssey Client Manager documentation for more information.
Note: Do NOT use WZC or the Odyssey Client Manager and the ZyXEL utility at the
same time.
1.4 Windows XP Users Only
Note: When you use the ZyXEL utility, it automatically disables the Windows XP
wireless configuration tool.
To disable the ZyXEL utility and use WZC to configure the G-302 v3, right-click the utility
icon (
) in the system tray and select Use Windows Zero Configuration. To activate the
ZyXEL utility again, double-click the icon and click OK.
Figure 3 Enable WZC
Figure 4 Enable ZyXEL Utility
Refer to the appendices on how to use WZC to manage the G-302 v3.