Xerox 7760 User Manual

Page 70

Printing on Specialty Media

Phaser® 7760 Color Laser Printer

3-35

Printing Transparencies from Tray 2

Pull out Tray 2.

Insert the transparencies into the tray and adjust the paper guides to fit the transparency
size.

Note:

Do not load transparencies above the transparency fill line inside the tray.

Push the tray completely into the printer.

When the control panel prompts you to confirm the type and size of paper in the tray:

Select

Change setup

, and then press the OK button.

Select the

Xerox Transparency

, and then press the OK button.

Select the transparency size, and then press the OK button.

Note:

For some sizes that can be loaded in either direction, you need to select the size

with the letters

LEF

(Long-Edge Feed) if you loaded the long edge of the paper along the

left side of the tray or

SEF

(Short-Edge Feed) if you loaded the short edge along the left

side of the tray.

In the printer driver, select Transparency as the paper type and/or select Tray 2 as the
paper source.

7760-023

7760-122