Binding edge options, Selecting 2-sided printing – Xerox 7760 User Manual
Page 66

Printing on Both Sides of the Paper
Phaser® 7760 Color Laser Printer
3-31
Binding Edge Options
When you use the printer driver to select 2-sided printing, also select the binding edge, which
determines how the pages turn. The actual outcome depends on the orientation (portrait or
landscape) of images on the page, as displayed in the following illustrations.
Selecting 2-Sided Printing
To perform automatic 2-sided printing:
1.
Load paper into the tray:
Tray 1 (MPT)
■
Long-Edge Feed: Insert side one faceup with the long edge entering the printer first
and the top of the page towards the front of the printer. Prepunched holes enter the
printer first.
■
Short-Edge Feed: Insert side one faceup with the short edge entering the printer first
and the top of the page towards the left side of the printer. Prepunched holes are at the
back of the tray.
Trays 2-5
■
Long-Edge Feed: Insert side one facedown with the long edge towards the left side
of the printer and the top of the paper at the front of the tray. Prepunched holes are
towards the left side of the printer.
■
Short-Edge Feed: Insert side one facedown, with the short edge towards the left side
of the printer and the top of the paper towards the right side of the tray. Prepunched
holes should be towards the front of the tray.
2.
In the printer driver, select 2-sided printing. The location of the selection depends on your
computer’s operating system.
Portrait
Landscape
Bind on Side Edge
Flip on Long Edge
Bind on Top Edge
Flip on Short Edge
Bind on Side Edge
Flip on Short Edge
Bind on Top Edge
Flip on Long Edge