Xerox 7760 - Manual (Page 65)

Printing on Both Sides of the Paper
Phaser® 7760 Color Laser Printer
3-30
Printing on Both Sides of the Paper
This section includes:
■ Automatic 2-Sided Printing Guidelines on page 3-30
■ Binding Edge Options on page 3-31
■ Selecting 2-Sided Printing on page 3-31
Note: For information about manual two-sided printing, go to the Knowledge Base at
www.xerox.com/office/7760support .
Automatic 2-Sided Printing Guidelines
To use the printer’s automatic 2-sided printing (duplex) feature:
■ The paper must have a length of 148–457 mm (5.83–18 in.).
■ The paper must have a weight of 75–169 g/m
2
(20–40 lb. Bond).
■ The paper type must be: Plain Paper, Heavy Plain Paper, Preprinted, Prepunched,
Colored Paper, Letterhead, Thin Card Stock, or Thin Glossy Paper.
The following paper and media cannot be used for 2-sided printing:
■ Thick and Extra Thick Card Stock
■ Thick Glossy Paper
■ Transparencies
■ Envelopes
■ Labels
■ Any die-cut specialty media, such as business cards
See also:
Supported Paper and Media on page 3-3