ZyXEL Communications PRESTIGE 128MH - Manual (Page 93)

Prestige 128MH PSTN Router/Hub
Remote Node TCP/IP Configuration 5-1
Chapter 5
Remote Node TCP/IP Configuration
This chapter shows you how to configure the TCP/IP parameters of a remote node.
5.1 LAN-to-LAN Application
A typical LAN-to-LAN application is to use your Prestige to connect a branch office to the
headquarters, as depicted in the following Figure 5-1.
Figure 5-1. TCP/IP LAN-to-LAN Application
For the branch office, you need to configure a remote node in order to dial out to the headquarters.
Additionally, you may also need to define static routes if some services reside beyond the
immediate remote LAN.
Coporate LAN
Branch Office LAN
Prestige 128MH