ZyXEL Communications PRESTIGE 128MH - Manual (Page 76)

Prestige 128MH PSTN Router/Hub
4-4 Remote Node Configuration
Table 4-1 contains the instructions on how to configure the Remote Node Menu for dial-up lines.
Table 4-1. Remote Node Profile Menu Fields for Dial-up Lines
Field Description Options
Rem Node Name This is a required field [?]. Enter a descriptive name for
the remote node, for example, Corp.
This field can be up to eight characters. This name must
be unique from any other remote node name or remote
dial-in user name.
Active Press the space bar to toggle between [Yes] and [No].
Inactive nodes are displayed with a minus sign (-) at the
beginning of the name in Menu 11. Press space
bar to toggle
[Yes/No]
Connection Type Use the space bar to toggle between [Switch] and
[Leased]. If [Leased] is selected, moving the cursor to the
next field will bring you to Submenu 11.1.2 for leased line
configuration. Press space
bar to toggle
[Switch/Leased]
l If this parameter is set to [Both], your Prestige can
both place and receive calls to/from this remote
node.
[Both]
l If set to Incoming, your Prestige will not place a call
to this remote node.
[Incoming]
l If set to Outgoing, your Prestige will drop any
incoming calls from this remote node.
[Outgoing]
Call Direction
Several other fields in this menu depend on this
parameter. For example, in order to enable [Callback], the
Call Direction must be [Both].