ZyXEL Communications PRESTIGE 128MH - Manual (Page 149)

Prestige 128MH PSTN Router/Hub
System Security 11-3
11.2 Using RADIUS Authentication
Your Prestige has a built-in dial-up user list; however, the number of users that can be stored
locally is limited due to memory constraints. If you have more users than what the Prestige can
store locally, use an external RADIUS (Remote Authentication Dial-In User Service) server that
provides authentication service for unlimited number of users.
11.2.1 Installing a RADIUS Server
To use RADIUS authentication, you need to have a UNIX or Windows NT machine on your
network as the RADIUS server, as well as the RADIUS software itself.
You can obtain the RADIUS server software, along with documentation, at
http://www.livingston.com/Tech/FTP/pub-le-radius.shtml or
ftp://ftp.livingston.com/pub/le/radius /
Follow the included instructions to install the software on your server.
After you install the server software, you will need to edit the dictionary file in the RADIUS
configuration directory (usually /etc/raddb ). Using any text editor, add the following lines to
the dictionary file:
# Zyxel proprietary attributes
ATTRIBUTE Zyxel-Callback-Option 192 integer
VALUE Zyxel-Callback-Option None 0
VALUE Zyxel-Callback-Option Optional 1
VALUE Zyxel-Callback-Option Mandatory 2
# Callback phone number source
ATTRIBUTE Zyxel-Callback-Phone-Source 193 integer
VALUE Zyxel-Callback-Phone-Source Preconfigured 0
VALUE Zyxel-Callback-Phone-Source User 1
These changes add the support for CLID authentication, as described in the section below.