ZyXEL Communications ZyXEL Dimension ES-4124 - Manual (Page 97)

ES-4124 Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
97
Step 4. Setup the switch A’s VRRP as the Backup of VRRP group 1.
In the GUI menu Advanced Application >> VRRP, enter the “Configuration”
link.
1. authentication: no change
2. key: no change
3. Then input the VRRP information as following figure. Here we use
VRRP=1 and use priority=100 to indicate it is the Backup role.
Step 5. Setup the switchB’s VLAN to apply the environment. Refer to Step2
for the same setting.
Step 6. Add one more interface info for the switch B’s IP. Similar as switch
A’s setting at Step3, but different IP address as following.