beautypg.com

ZyXEL Communications ZyXEL Dimension ES-4124 User Manual

Page 92

background image

ES-4124 Support Notes


All contents copyright (c) 2006 ZyXEL Communications Corporation.

92

Step 5. Setup the switch B’s VLAN to apply the environment. Refer to Step2
for the same setting.

Step 6. Setup the switch B’s IP address of two interfaces and uplink gateway.
Similar as switch A’s setting at Step3, but different IP address as following.

Configure Switch B’s IP setting via GUI menu Basic Setting >> IP Setup.

- Default Gateway: 192.168.254.1
- 1st IP address for

user subnet interface

: 192.168.1.5/24 with VID=1,

see figure example as below.

- 2nd IP address for

uplink interface

: 192.168.254.3/24 with VID=2

Step 7. Setup the switch B’s VRRP as the Backup of group 1. Please refer to
Step6. Please note to use

See also other documents in the category ZyXEL Communications Computer Accessories: