Xerox 1150 User Manual
Page 81
ENWW
Status light patterns 73
Return to
.
Printer initialization/Cancel
Job/Cleaning Mode
A printer initialization is taking
place. If all lights blink for 1/2 of
a second or longer in a
sequence:
●
the printing is initializing
●
all previously sent print jobs
are being purged
●
a cleaning page is being
printed
No action is necessary.
Fatal error
All lights are on.
●
Turn the printer off and then back on.
●
Unplug the printer for 5 minutes, and then plug it back
in.
●
If the printer still has an error,
Accessory error
All lights are blinking.
●
Remove the DIMMs and replace if necessary. See
Installing a memory DIMM (1300 series only)
for
instructions.
●
Control panel light message (continued)
Light status Condition of the printer
Action
This manual is related to the following products: