Installing a memory dimm (1300 series only), Installing a memory dimm, 1300 series only) – Xerox 1150 User Manual
Page 146: Installing a memory, Dimm (1300 series only)
138 Appendix F
Memory
ENWW
Installing a memory DIMM (1300 series only)
If you add memory (RAM only) to the HP LaserJet 1300 series printer, you can print more complex
print jobs.
To install a DIMM, follow the instructions below:
CAUTION
Handling a DIMM chip (memory) without wearing a grounded, antistatic device might damage the
DIMM chip. Touch the printer or a piece of sheet metal before touching the DIMM.
1
Turn off the power switch, and unplug the printer.
2
Remove the parallel adaptor or the print server from the LIO connetivity slot.
3
Open the print cartridge door. To open the left side panel, gently pull it out.
This manual is related to the following products: