Xantrex Technology Powerpack 300 User Manual
Page 44
Recharging the XPower Powerpack Battery
31
Note
:
The Battery Level LEDs are only accurate when the
XPower Powerpack has been disconnected from all appliances
and all charging sources for 15 minutes.
Important: •
•
Do not leave the XPower Powerpack permanently connected
to the vehicle’s lighter socket or 12 V accessory outlet.
•
Do not solder or hard wire the DC charging cable from the
Powerpack to an external electrical system. The charging
cable is designed for temporary use only to recharge the
Powerpack battery.
See also other documents in the category Xantrex Technology Tools:
- SW Plus 2548 (344 pages)
- XDC 60-100 (284 pages)
- RS232-XPD (60 pages)
- 230 VAC/50 (73 pages)
- XDC 20-300SL (36 pages)
- JAZZ 250 (36 pages)
- XPD 120-4.5 (56 pages)
- ACCB-L-L1 (64 pages)
- 250 (36 pages)
- 400R (74 pages)
- 40 A (XADC-40) (20 pages)
- XPR 40-150 (80 pages)
- GT100E (40 pages)
- C60 (114 pages)
- GPIB-M-XFR3 (134 pages)
- 600HD (64 pages)
- XTR600 (274 pages)
- XW POWER SYSTEM XW6048-120/240-60 (136 pages)
- GT3.0 (110 pages)
- 300 PLUS (64 pages)
- PV100S-208 (90 pages)
- PROwatt 600 (66 pages)
- 700 PLUS (52 pages)
- XDL 35-5TP (180 pages)
- C40R/100 Remote (34 pages)
- Powerpack 100 (53 pages)
- XPower Powerpack 400 R (82 pages)
- XDI2048 (92 pages)
- Solar 400 (66 pages)
- PV-225208 (47 pages)
- XPF 35-10 (40 pages)
- ACCB (66 pages)
- PROwatt 1000 (78 pages)
- XMP 2600 (119 pages)
- XDC (254 pages)
- XFR 2800 (90 pages)