Xerox X12 User Manual
Page 4
Page 4
Part number: 45022476
ColorWise Pro Tools for Windows and Mac OS computers are fundamentally the same.
The windows and dialog boxes illustrated are the Windows versions.
N
OTE
:
Changing the calibration has the potential to affect
all
jobs for
all
users, so you may
want to limit the number of people authorized to perform calibration.
T
O
CALIBRATE
THE
COPIER
USING
C
ALIBRATOR
1.
Launch ColorWise Pro Tools and connect to the Fiery.
For instructions on configuring the connection for ColorWise Pro Tools, see
Getting Started
.
2.
Click Calibrator.
The EFI ED-100 is available as a measurement method. This information is provided to
Calibrator by the Fiery. If the option does not appear, make sure you are connected to a
Fiery that supports the EFI ED-100. Not all Fierys support the EFI Densitometer ED-100.
N
OTE
:
It is very important that the copier you are calibrating and the computer that the
EFI ED-100 is connected to are connected to the same Fiery server. Also, be sure to print
the measurement patches from the copier you are calibrating, because the EFI ED-100 uses
formulas specific to the copier to convert the raw EFI ED-100 measurements into
ColorWise Calibrator compatible densities.