Yamaha mLAN8E - Manual (Page 13)

13
English
Settings on the device in which the mLAN8E is installed
mLAN Cnfg (mLAN configuration)
Output Level Offset, Word Clock Mode, and Nickname settings are saved in
the mLAN8E. They cannot be saved on disk.
Cursor 1
■
Knob 1
[ turn] Move cursor / switch pages
Move the cursor or switch pages.
[ press] Tree View
Access the Tree View screen.
■
Knob 2
[ turn] Output Level Offset
Specify the output volume (offset value) for all mLAN audio outputs.
❑ Setting: +0 dB ~ +24 dB
■
Knob 4
[ turn] Audio Input (audio input select)
Select the audio input source.
❑ Setting
ADIn: Use two analog audio channels from the INPUT jacks of the A5000/A4000.
mLAN: Use two mLAN audio channels. The audio signals from the INPUT jacks of the A5000/
A4000 will not be input.
Cursor 2
■
Knob 1
[ turn] Move cursor / switch pages
Move the cursor or switch pages.
[ press] Tree View
Access the Tree View screen.
■
Knob 3
[ turn] Word Clock Mode
Specify the word clock.
❑ Setting
Auto: The word clock of the audio output will automatically synchronize to an 44.1 kHz external
device. The A5000/A4000 may function as the master in some cases, or as the slave in
other cases.
Group1Master (44.1 kHz): The A5000/A4000 will function as a 44.1 kHz master device.
NOTE