Zebra Technologies SL5000r/T5000r - Manual (Page 45)

Command Syntax
45
Orit Font orientation:
N - No rotation (Default)
R - Rotate 90 degrees clockwise
I - Inverted
B - Rotate 270 degrees clockwise
For Scalable fonts:
Height Individual character height in printer dots
Default value: 10 dots
Acceptable value: 10 to 1500
Width Individual character width in printer dots
Default value: 10 dots
Acceptable value: 10 to 1500
NOTE: If ^CI14 or ^CI15 or ^CI22 is not received, even though the font
identifier maps to a DBCS font, the functionality of ^Ax will also be the
same as it is in the ZGL emulation.
(B) Select International Set Command
Purpose This command selects the DBCS character set for printing
double-byte characters.
Format ^ CIfont_id
^CI Selects International Set Command
font_id International Font selection
Default is 0 (US-ASCII)
14, 15, or 22 - DBCS character Set
NOTE: The functionality of ^CI is the same as it is in the ZGL emulation, if
font_id is not a DBCS font identifier.