Zebra Technologies SL5000r/T5000r - Manual (Page 10)

10
Chapter 1 PPI/ZGL SETUP Menu
PPI/ZGL SETUP Menu
Enable* Disable
560K Bytes* 160-3600K Bytes
PPI/ZGL SETUP 1
ZPL Compatible
126* Command Prefix
Label Prefix
LP+ Text Mode
Delimiter
94*
ZPL-II* ZPL-I
Preparser Command
MC Label Fmt
Preparser Port
PQ Label Fmt List Format*
Label Buf Size
Host Form Length
1-255
1-255
44* 1-255
Absorb*
HS Command* JA Command
Disable* Parallel
List Format* Bitmap Format
Auto Pass-thru
Serial
Left Position
0* -1000 to 1000
Notes:
* = Default.
Italicized items are available when you enable Admin User (in
the PRINTER CONTROL menu).
1 When substituting a Zebra Xi III model printer with a
SL5000r/T5000r printer, refer to the menu conversion in
Appendix F.
2 Factory default for printers with 203 dpi printhead = 207 dpi.
Factory default for printers with 300 dpi printhead = 301 dpi.
3 Range for printers with 203 dpi printhead = 201 - 220 dpi.
Range for printers with 300 dpi printhead = 301 - 330 dpi.
4 Each character set will contain different individual
characters. PPI uses scalable fonts rather than bitmapped
fonts.
Top Position
0 dots/inch* -100 to 100 dots/inch
Resolution Mode Full * Half
Vertical Adjust Disable* Enable
Vertical Density 207 * 2 201-220 3
IS Label Format
List Format* Bitmap Format
ZGL Quiet
Bitmap Format
(Continued on next
page)
Ethernet
Ignore
HS & JA Command