Zebra Technologies SL5000r/T5000r - Manual (Page 20)

20
Chapter 2
^FT - Field Type Set
This command sets the x/y coordinate (relative to the “home” position) of a
subsequent field. It differs from the ^FO command in that the coordinate is
always for the left end of the “baseline” of a field regardless of rotation.
^FW - Field Orientation
This command sets the default rotation for commands that have a rotation
parameter that is left blank.
^FX - Comment
This command allows comments that do not print to be placed in the label
definitions.
^GB - Graphics Box
This command generates boxes and lines. It is also used in conjunction with
reversed fields.
^GC - Graphic Circle
This command generates circles. It is also used in conjunction with reversed
fields.
^GD - Graphic Diagonal Line
This command generates diagonal lines. It is also used in conjunction with
reversed fields.
^GE - Graphic Ellipse
This command generates ellipses. It is also used in conjunction with reversed
fields.
^GS - Graphic Symbol
This command generates any of the five special symbols: registered
trademark, copyright, trademark, UL, and CSA.
~HI - Host Identification
This command returns a string to the host, including the printer model,
software version, dots per millimeter setting, memory size, and other options.
^HG - Host Graphic
This command uploads a graphic image from RAM or Flash to the host.
^HV - Host Verification
This command sends back the data in a ^FN (Field Number) field to the host.