Xerox 96/4635/180 IPS - Manual (Page 48)

MAINTENANCE AND SUPPORT SERVICES
7-4 XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE
Figure 7-1. Billing Information window
Note: The information in the IOT Engine Type field varies,
depending on your IPS model.
• Meter A gives the total impressions successfully delivered by
the printer. This meter keeps a permanent cumulative record of
how many sheets are delivered to an output destination. It
cannot be cleared or reset. This recording is reported by the
customer.
• Meter C counts all sheets fed into the paper path from trays 1,
2, 3, or 4. It is a user meter and can be cleared by the controller.
•
Meter E counts all good sheets sent to the intended output
destination. It is a user meter and can be cleared by the
controller.
• Meter F performs the same function as Meter A (total
impressions successfully delivered), except it can be cleared by
the controller.
•
Meter H counts all good duplex sheets delivered to the intended
output destination. It is a user meter and can be cleared by the
controller.
•
Meter J is not used.