Xerox 96/4635/180 IPS User Manual

Page 19

FEEDER TRAYS

XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE

1-9

8. Push the tray in slowly but firmly until it latches. Do not slam the

tray closed. This can cause improper latching or machine
damage.

9. If the printer stopped due to a low paper condition, press the

Continue button on the printer console to resume printing.

Note:

When you change the paper size in one of the feeder trays,

a message displays asking you to make sure the printer is warmed
up, ready, and loaded with the proper media. The message displays
the media defined for the tray, as well as the paper currently loaded
in the tray.

Currently, there is no method of restoring the Input Configuration to
its original state. Once you select Modify, the Input Configuration
window appears. Make changes on the window as appropriate, then
save your changes. For detailed information on the Input
Configuration window, refer to your Xerox DocuPrint 96/4635/180
IPS Guide to Configuring and Managing the System.