Xerox 96/4635/180 IPS - Manual (Page 25)

XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE 3-1
3. 3 Fuser lubricant
The fuser on the 96, 4635, and 180 IPS is responsible for fusing the
print image to the paper with heat. It is critical that the fuser be kept
lubricated with fuser agent and that its reservoir be kept full. This
chapter describes the procedure for adding fuser lubricant in the
printer.
To add fuser lubricant:
1. Open the right and left doors of the printer and locate the fuser
area.
2. Place a dropcloth on the floor under the fuser area.