Xerox 96/4635/180 IPS - Manual (Page 29)

XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE 4-1
4. 4 Adding dry ink
Dry ink is the black powder that forms the image on the printed page.
This chapter describes the procedure for adding dry ink to the printer.
When the printer is low on dry ink, the Attention light turns on, and the
message ADD DRY INK displays on the printer console. Add dry ink
at your earliest convenience.
If you do not add dry ink, the printer eventually stops printing. It does
not resume printing until you replace the dry ink bottle.
Note: Do not discard damaged, unused dry ink bottles. Return the
bottles to Xerox for exchange (for credit in the USA).
Caution: To prevent dry ink spillage, remove the cartridge only
when directed to do so by a message on the printer control
console.
To add dry ink:
1. Open the printer doors and locate the dry ink area on the left
side of the printer.
2. Place a dropcloth on the floor under the dry ink area.