Xantrex Technology FREEDOM HW 1000 - Manual (Page 7)

v
This guide for use by qualified installers only
Important Safety Instructions
R
EAD AND SAVE THIS
I
NSTALLATION
G
UIDE FOR FUTURE
REFERENCE
.
This chapter contains important safety and operating instructions for the
Freedom HW Inverter/Charger unit.
1. Before installing and using the Freedom HW, read all instructions and
cautionary markings on the Freedom HW, the batteries, and all
appropriate sections of this guide.
2. Do not expose the Freedom HW to rain, snow, spray, or bilge water.
To reduce risk of fire hazard, do not cover or obstruct the ventilation
openings. Do not install the Freedom HW in a zero-clearance
compartment. Overheating may result.
3. To avoid a risk of fire and electric shock, make sure that existing
wiring is in good condition and that wire is not undersized. Do not
operate the Freedom HW with damaged or substandard wiring.
4. The use of any attachments not recommended or sold by Xantrex,
may result in risk of fire, electric shock, or injury to persons.
5. Do not operate the Freedom HW if it has received a sharp blow, been
dropped, or otherwise damaged in any way. If the Freedom HW is
damaged, see the Warranty section.
WARNING: Limitations on use
The Freedom HW is not intended for use in connection with life support systems
or other medical equipment or devices.
CAUTION: Risk of injury
To reduce the risk of injury, charge only 12 Vdc lead-acid (GEL, AGM, or
Flooded) rechargeable batteries. Other battery types may burst, causing personal
injury and damage.