Yamaha CVP-49 - Manual (Page 15)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
11
■
Split Balance
Split Mode
The volume balance between the left-hand and right-hand voices can be ad-
justed by using the TEMPO [▲] and [▼] buttons while holding the [SPLIT] but-
ton. The selected balance value (1 … 15) will be shown on the TEMPO display
while the [SPLIT] and TEMPO [s] or [▼] buttons are held.
■ A setting of “1” sets the volume of the left voice to maximum and the right
voice to minimum (no sound).
■ A setting of “8” sets both voices to the same volume (this is the default balance
setting, and can be recalled by pressing the TEMPO [▲] and [▼] buttons si-
multaneously).
■ A setting of “15” sets the volume of the right voice to maximum and the left
voice to minimum (no sound).
NOTES
• Hold either the TEMPO [ ▲ ] or [ ▼ ] button for continuous scrolling in the specified
direction.
■
Damper Pedal Operation in the Split Mode
The damper pedal (the right pedal — see “The Pedals” on page 14) can be as-
signed to the left voice only, the right voice only, or to both voices in the split
mode.
■ Right Voice Only (default): Press the right (damper) pedal while holding the
[SPLIT] button.
■ Left Voice Only: Press the left (soft) pedal while holding the [SPLIT] button.
■ Both Voices: Press both the right and left pedals while holding the [SPLIT]
button.
NOTES
• The dual and split modes cannot be used at the same time.
• In the split the soft and sostenuto pedal functions apply to both the left- and right-
hand voices.
• When the ABC Single Finger mode (page 20) and the split mode are used simul-
taneously, the left-hand voice will be accompanied by the appropriate ABC chord
voices.
TEMPO
SPLIT
SPLIT