beautypg.com

Getting started – Yamaha RX-Z7 User Manual

Page 9

background image

GETTING STARTED

9

En

INTR

ODUCTION

Installing batteries in the remote control

1

Take off the battery compartment cover.

2

Insert the four supplied batteries
(AAA, LR03, UM-4) according to the polarity
markings (+ and –) on the inside of the
battery compartment.

3

Snap the battery compartment cover back
into place.

• Change all of the batteries if you notice the following

conditions:
– the operation range of the remote control decreases.
– the transmit indicator does not flash or its light becomes dim.

• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as
these different types of batteries may have the same shape and
color.

• If the batteries have leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before
installing new batteries.

• Do not throw away batteries with general house waste; dispose

of them correctly in accordance with your local regulations.

• If the remote control is without batteries for more than 2

minutes, or if exhausted batteries remain in the remote control,
the contents of the memory may be cleared. When the memory
is cleared, insert new batteries, set up the remote control code
and program any acquired functions that may have been
cleared.

Getting started

About this manual

• y indicates a tip for your operation.
• Some operations can be performed by using either the

buttons on the front panel or the ones on the remote
control. In case the button names differ between the front
panel and the remote control, the button name on the
remote control is given in parentheses.

• This manual is printed prior to production. Design and

specifications are subject to change in part as a result of
improvements, etc. In case of differences between the
manual and product, the product has priority.

• “BMASTER ON/OFF” or “3DVD” (example)

indicates the name of the parts on the front panel or the
remote control. Refer to the attached sheet or “Appendix”
(separate booklet) for the information about each position
of the parts.

1

3

2

Notes